UNS N08020 Buttweld Fittings, 2.4660 Butt weld Pipe Fittings,Carpenter 20 Seamless Pipe Fittings, Carpenter 20 Butt weld Pipe Fittings, Alloy 20 Buttweld Fittings, UNS N06400 Pipe Fittings, Alloy 20 Butt weld Pipe Fittings
Bhawal Steel Agency is a manufacturer and supplier of Alloy 20 buttweld fittings and a dedicated producer of the same material in other forms such as wires, sheets, plates, and coils. We've been working for decades to provide the great service to our valued clients for the assured items that we deliver, and our products always have a longer service life than the competition. SS ALLOY 20 buttweld fittings types are identified as Astm A403 Wp Alloy 20 Ss Elbow Long Radius, Astm A403 Wp Alloy 20 Elbow Short Radius, Astm A403 Wp Alloy 20 Reducing Elbow, Astm A403 Wp Alloy 20 Ss 45 Degree Elbow, Astm A403 Wp Alloy 20 Fabricated Tee, Astm A403 Wp Alloy 20 Reducer, Astm A403 Wp Alloy 20 Eccentric Reducer, Astm A403 Wp Alloy 20 Stub Ends, Astm A403 Wp Alloy 20 Tees, Astm A403 Wp Alloy 20 End Cap, Astm A403 Wp Alloy 20 Coupling, and so on.
Various industries, such as nuclear fuel processing plants and steel mills, demand Alloy 20 buttweld fittings. The corrosion resistance of Alloy 20 Pipe Fittings is adequate, and they are acidic solution resistant. It can operate at a high boiling temperature without breaking down. Alloy 20 Pipe Fittings have high tensile strength and are developed to show long-lasting service life. Our manufactured product can work in cryogenic temperature ranges swiftly. We analyze each product for various qualities, including chemical and physical factors, before deliveries.
We also conduct quality assurance tests to warranty analysis, chemical testing, micro-macro element detection, and other procedures. Our organization adheres to the highest levels of product safety and quality. Every product, in our opinion, should have unique features that meet national and international requirements.
ALLOY 20 PIPE FITTINGS SPECIFICATION
Specifications : ASTM B 366 / ASME SB 366
Standard : ASTM / ASME / ANSI
Size : 1/2" - 10" Seamless / 1/2" - 48" Welded
Schedules :Sch 5 TO Sch XXS.
Type : Seamless / ERW / Welded / Fabricated
Wall Thickness : From 2 to 40 mm.
ALLOY 20 PIPES FITTING EQUIVALENT GRADE
| STANDARD | WERKSTOFF NR. | UNS | AFNOR | EN |
| Alloy 20 | 2.4660 | N08020 | Z2NCUD31-20AZ | NiCr20CuMo |
ALLOY 20 PIPES FITTINGS CHEMICAL COMPOSITION
| Grade | Ni | Fe | C | Mn | Si | Cu | Cr | Mo | S | P | Nb |
| Alloy 20 | 32 - 38 | Bal | 0.02 max | 1 - 2 | 0.7 max | 3 - 4 | 19 - 21 | 2 - 3 | 0.005 max | 0.02 max> | 0.1 - 0.3 |
ALLOY 20 BUTTWELD FITTING MECHANICAL PROPERTIES
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Alloy 20 | 8.1 g/cm3 | 1443 °C (2430 °F) | Psi -80,000, MPa -551 | Psi - 35,000, MPa - 241 | 30 % |
Alloy 20 Pipe Fittings Dimensions :
| Nominal Pipe Size | All Fittings | All Fittings | All Fittings | Elbows/ Tees | 180° Return Bends | 180° Return Bends | 180 Deg Return Bends | Reducers | Caps |
|---|---|---|---|---|---|---|---|---|---|
| NPS | O.D. at Bevel (1), (2) | I.D. at End (1), (3), (4) |
Wall Thickness (3) | Centre-to-End Dimension A,B,C,M | Centre-to-Centre O | Back-to-Face K | Alignment of Ends U | Overall Length H | Overall Length E |
| ½ to 2½ | 0.06 -0.03 |
0.03 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
| 3 to 3 ½ | 0.06 | 0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
| 4 | 0.06 | 0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
| 5 to 8 | 0.09 -0.06 |
0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.25 |
| 10 to 18 | 0.16 -0.12 |
0.12 | Not less than 87.5% of nominal thickness | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
| 20 to 24 | 0.25 -0.19 |
0.19 | Not less than 87.5% of nominal thickness | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
| 26 to 30 | 0.25 -0.19 |
0.19 | Not less than 87.5% of nominal thickness | 0.12 | … | … | … | 0.19 | 0.38 |
| 32 to 48 | 0.25 -0.19 |
0.19 | Not less than 87.5% of nominal thickness | 0.19 | … | … | … | 0.19 | 0.38 |
Testing & Packaging
We at Bhawal Steel Agency Ensure the best quality of Packing, because its play important role especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put extraordinary concern regarding packaging.
Industries We Serve
Chemical Research Industries
Petroleum and Gas Industries
Agriculture Engineering Industries
Mechanical Engineering Industries
Civil Engineering Industries